PROFILINE keraminė danga CC vinilui ir PPF

SONAX PROFILINE Ceramic Coating CC Vinyl + PPF is a special one-step sealant with a long-lasting effect on colored films and paint protection films used on vehicles. Due to its flexible structure, it forms a stable bond with the films and provides excellent water and dirt repellence properties. It improves the color depth of both gloss and matte films without changing their gloss. Gives films a pleasant softness to the touch. Set of 4 appliqué cushions.

Usage:

Clean the films thoroughly. Immediately before sealing, the surfaces must be completely clean. To do this, spray SONAX PROFILINE Prepare (SO-237-300) on a microfiber cloth soft touch (SO-451-000) and thoroughly clean all surfaces to be treated.
On the light side of the application pad, drop CC Vinyl + PPF and apply a sufficient amount amount of liquid on the surface. The treated area should be about half a square meter (1/4 hood). Care must be taken to ensure even application, as many films are highly absorbent, otherwise spotting or clouding (high spots) may occur. Wipe off excess product immediately with SONAX Coating Towel (SO-451-100). If the applicator starts to harden with use, simply use a new one.
After treating the entire vehicle in this way, the coating should cure for at least 6 hours. During this time, the vehicle must be left in a clean and dry environment and the surfaces must not be touched. For optimal product effects, we recommend leaving the coating on for 12 hours to ensure a complete reaction with the film.

ATTENTION: Ensure good ventilation during processing.