-15%

Kontactinis šildytuvas šildo skystį arba alyvą

Calix Blockheater RE 948

€93.27

€79.28 Save 15%

Tax included

Kaina galioja tik perkant internetu.

Cold engine operation is the most harmful to the environment, but with the Calix electric engine heater you can not only avoid this, but also save money.

Heated engine:

Easier to start
Less wear
Emits less harmful gases

Reference CX-1864800

Description

Contact heater systems can be divided into two different groups:

Engine cylinder block heaters
Oil sump heaters

Contact heaters consist of an aluminum cast element adapted to the installation location. Oil sump contact heaters heat the oil instead of the coolant. The increase in engine block temperature caused by a contact oil sump heater is not directly comparable to an engine heater that heats the coolant. Thermal paste is applied to the contact surfaces to improve the heat transfer from the heater to the engine block or oil sump.

Engine preheater heaters, MKMS cable sets and GL series cables are selected strictly according to the car model.

In order to correctly choose the right product for your car, use the "CHOICE CATALOG" or contact our representative.

Vehicle selection

Select product

The video is informative.

The wiring kit MKMS is required to install the engine heater.

User Guide

To maximize the output from the preheating system with minimum energy consumption and environmental impact, use the connection periods shown in the table below.

When +10°C approx. 1h
When 0°C approx. 1h
When -5°C approx. 1.5h
When -10°C approx. 2h
When -20°C approx. 3h

Use either an external outdoor timer or an integrated programmable Calix Bluetooth timer to simplify planning and the use of the preheating system.

After using the Calix preheating and/or charging system.

Disconnect the Calix MS power cable by pulling on the plug; never pull on the cable.
Make sure the protective cover for the MK connector is closed.
Put the protective cover on the open MS power cable connector.
Note that the preheating system is designed for a normal use of up to 3 connections per day of max 3 hours each.
For professional use with constant connection e.g. in rescue and emergency vehicles or emergency generators, contact your Calix dealer for advice.

The engine heater element may burn out if: