ProfiLine CutMax polish 6|4

Highly effective abrasive paste for rotary polishing machines. Ideal for heavily weathered, scratched or sanded paint layers. Removes scratches and inclusions from refinishes, smoothes scuffs and removes paint spray. Eliminates abrasive grooves from sandpaper P1000 and finer. Thanks to the innovative Low Dust Technology, it is dust-free in use. Sanding capacity: 6 Gloss level: 4.

Product Application

Shake bottle before use. Put some product on the SONAX Foam Pad hard (04931000) or the SONAX Lambswool Pad (04931410) and polish at low speed and increased pressure for about 10 seconds, the machine can be slightly tilted in case of deep scratches. Then polish with low pressure for approx. 20 seconds, place the sponge flat. Then apply new product to the pad and perform another polishing pass. The times refer to average hard paint and an area of approx. 50 x 50 cm to be polished. Remove polish residues with SONAX Microfibre Cloth soft touch (04510000). Then polish with SONAX PROFILINE PerfectFinish (02243000).

Clean polishing pads regularly and never use different polishes on the same pad. Do not use on hot surfaces.

PLEASE NOTE: Protect from frost.