Tepalas su PTFE (Teflonu)

A grease-free lubricant and release agent based on PTFE (Teflon or polytetrafluoroethylene).

• Eliminates creaking, squeaking and stiffness and provides long-lasting wear protection.
• Dry lubricant does not attract dirt or dust.
• Operating temperature range -40 °C to +250 °C.
• For optimal lubrication of moving parts such as slide rails, connectors, locking parts, belt mechanisms, etc.
• As a separation agent or to eliminate the noise of coverings of almost all materials.
• Especially suitable for areas where oil and silicone-containing lubricants deteriorate finishing work.

Application

The treated surface must be free of grease, clean and dry. Apply thin layers and allow to dry. Expandable capillary tube ensures precise spraying. By bending the capillary tube, large areas are sprayed. It also sprays upside down.

Danger
H315 - Irritating to skin.
H412- Harmful to aquatic organisms, causes long-term effects.
H222-Extremely flammable aerosol.
H229-Pressurized container: May explode when heated.
P101-If medical advice is needed, have product container or label at hand.
P102 - Keep out of reach of children.
P210- Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke.
P211 - Do not spray on an open flame or other ignition source.
P251 - Do not puncture or burn, even after use.
P280 - Wear protective gloves.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P332+P313 - If skin irritation occurs: Get medical attention.
P410+P412 - protect from sunlight. Do not store above 50°C. Explosive mixtures may form in the absence of adequate ventilation.
Hydrocarbons, C6-C7, n-alkanes, azoalkane, cyclic, <5% n-hexane