Tarpinių ir sriegių sandariklis Loctite MR 5923 117ml

Loctite MR 5923 - Thread and inner sealant. Rigid or flexible connections

In engines and gearboxes. Suitable for sealing or repairing flanges when installing old or new pre-cut gaskets.

Benefits:
Seals flanges or repairs pre-cut compression washers
Great for assembly of parts after repair work
Low viscosity product
Packed in cans with a brush in the cap

Technical data:
Connection type: Rigid or flexible
Space: Not applicable
Operating temperature range: -54 to +204 °C
Oil resistance: Good
Resistance to water, glycol: Good

Instructions for use

1. Remove all previous materials from mating surfaces.
2. For best results, clean and prep the area with an oil-free solvent.
3. Remove the cover. Apply with an applicator brush.
4. When using as a spacer filler, spread the product with a trowel to a uniform film on one side of the spacer and then place it on the assembly. Cover the second half of the gasket and reassemble. The slower drying formula increases the working time.
5. The assembly works after 4 hours, when fully cured after 24 hours.
6. The product can be removed from metal surfaces with isopropyl alcohol. If the sealant has been drying for a long time or at a high temperature, cover the sealant with alcohol and leave it overnight to soften.

Contains rosin
Propan-2-ol

Signal word: Dangerous

Hazard phrase:
H225 Highly flammable liquid and vapor.
H317 May cause an allergic skin reaction.
H319 Causes severe eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary statement: Precautions
P210 Keep away from heat sources, hot surfaces, sparks, open flames or other ignition sources. Do not smoke.
P261 Do not breathe vapor.
P280 Wear protective gloves.

Precautionary statement: Reactions
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical attention.